- ページ 6
アンプ Galaxy Audio JIB/PA50のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Galaxy Audio JIB/PA50 8 ページ。 Jacks in the box compact power amplifier 25w x 2
ページを印刷するSetup
Setup
Input 1 Control and Volume Setup
Figure 6
If you are using the Option A wiring
method of installation on page 3, do the
following:
1.
Insert a #1 flat blade screwdriver to the
Input 1 control.
2.
To test the volume, use the screwdriver to
gently turn the Input 1 control on the amp
counter-clockwise to the end (Figure 6).
3.
Turn Input 1 control clockwise 1/4 turn.
4.
Play sound from the loudest audio source
input on the projector to help adjust the
amp volume.
5.
Turn the Input 1 control on the amp
clockwise slowly until the sound distorts.
6.
Turn the Input 1 control counter-clockwise
until the distortion disappears.
7.
Adjust the projector volume until you reach
the desired sound level.
If you are using the Option B wiring
method of installation on page 3, do the
following:
1.
Insert a #1 flat blade screwdriver to the
Input 1 control.
2.
To test the volume, use the screwdriver to
gently turn the Input 1 control on the amp
counter-clockwise to the end (Figure 6).
3.
Turn the Input 1 control clockwise 1/4 turn.
4.
Turn the 10k pot volume to the maximum
level.
5.
Play sound through all the audio inputs on
the amp.
6.
Choose the loudest audio source to help
adjust the amp volume.
7.
Turn the Input 1 control on the amp
clockwise slowly until the sound distorts.
8.
Turn the Input 1 control counter-clockwise
until the distortion disappears.
9.
Adjust the 10k pot volume until you reach
the desired sound level.
After setting up the Input 1, let the sound
continue to play and proceed to the "Input
2 Setup" section on page 6.
5