- ページ 5

音楽ミキサー High End Hog iPCのPDF マニュアルをオンラインで閲覧またはダウンロードできます。High End Hog iPC 5 ページ。 Replacing a sata hard drive

12. Replace front panel to top of console and secure the 4 silver screws using a

4mm hex key.

13. Replace power, monitors, cables and all necessary external devices to the

main console.

Formatting the new Hard Drive

1. Insert System Restore CD into console's CD drive (this can also be

downloaded from www.flyingpig.com)

2. Connect a PS2 or USB keyboard to the back of the Hog iPC

3. Power cycle the console

4. When the console prompts you to "Press any key to boot from CD" press

a key on the attached keyboard (not console's front panel).

5. Wait for the console to prompt you for the type of install. Use the "tab"

key on your keyboard until "Full System Restore" is highlighted. Press

"Enter." The console will also ask you to confirm this.

6. Do not hit any keys or power cycle the desk during this process.

7. After the hard drive has been reformatted, the console will need to

restart. Do not take the cd out of the drive. Your console may need to

restart itself more than once. Do not manually restart the desk.

8. When the console arrives at the Hog3PC start screen, you may remove

the cd.

9. You will need to re-configure your touchscreens, time/date, etc.

10. You may now re-load your shows on the hard drive. You can do this

quickly via the "File Management" window in the iPC Configuration Panel

**Please also see our System Restore document available online at

http://www.flyingpig.com/support/HogiPCSystemRestoreCD.pdf

Replacing a Hog iPC Hard Drive