- ページ 3
メディア・コンバーター Autonics SCM-WF48のPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。Autonics SCM-WF48 11 ページ。 Communication converter
Autonics SCM-WF48 にも： マニュアル (3 ページ), マニュアル (13 ページ), マニュアル (11 ページ)
ページを印刷する
Specifications
SCM-US48I / SCM-38I / SCM-US
Model
Insulation resistance
Noise strength
Mechanical
Vibration
Malfunction
Mechanical
Shock
Malfunction
Ambient temperature -10 to 55℃, storage: -20 to 60℃
Environ
-ment
Ambient humidity
Approval
Accessory
Unit weight
※ There might be some differences in the specification above depending on PC environment.
※ Environment resistance is rated at no freezing or condensation.
Integrated device management program (DAQMaster)
DAQMaster is the integrated device management program. Set the communication method switch of SCM-WF48 as
USB, and connect this unit and a PC with USB cable.
You can set the communication setting for SCM-WF48 by DAQMaster.
Visit our website (www.autonics.com) and download DAQMaster.
Item
Minimum requirements
IBM PC compatible computer with Intel Pentium Ⅲ or above
System
Operating system
Microsoft Windows 98/NT/XP/Vista/7
Memory
256MB or more
Hard disk
More than 1GB of free hard disk space
VGA
1024×768 or higher resolution display
Others
RS-232 serial port(9-pin), USB port
Part descriptions
SCM-WF48
1
3
4
6. Indicator
: Indicator for statue of AP mode and Infrastructure mode.
Mode
AP mode
Status
※ 1
Red ON
Initial error
Green ON
AP ready
Orange ON
Protocol socket error
OFF
Power is not supplied.
7. RS485 connector: Used for connecting RS485 communication cable.
8. USB connector: Used for connecting a PC, etc. with an USB cable.
SCM-US48I
Min. 100MΩ(at 500VDC megger)
±500V the square wave noise(pulse width: 1㎲) by the noise simulator -
0.75mm amplitude at frequency of 10 to 55Hz in each of X, Y, Z directions for 1 hour
0.5mm amplitude at frequency of 10 to 55Hz in each of X, Y, Z directions for 10 minutes
300m/s
(approx. 30G) in each of X, Y, Z directions for 3 times
2
100m/s
(approx. 10G) in each of X, Y, Z directions for 3 times
2
35 to 85%RH, storage: 35 to 85%RH
USB 2.0 AB type connector
(length: 1m)
Approx. 34.5g
2
5
6
7
8
Infrastructure mode
Try to AP connection
AP connection is complete
※ 2
Communication Converter
SCM-38I
-
Approx. 46g
1.Wi-Fi antenna
: Antenna for transmitting and receiving Wi-Fi communication
data. It may be broken when excessive pressure is applied.
2. Fixing screw hole
: Used for mounting the unit on a panel.
3. Rail Lock
: Used for fixing this unit at DIN rail mounting.
4. Communication method switch
: Switch for select communication method.
USB
RS485
(default)
For setting SCM-WF48I by DAQMater, select USB communication
method.
5. Terminating resistance switch
: Switch for whether using terminating resistance.
RT
OFF
[RT]: It uses terminating resistances.
[OFF]: It does not use terminating resis-
(default)
tance.
※ It is applied only when selecting RS485 communicaiton method.
※ Specifications of terminating resistance: 120 Ω, 1%(F) grade chip
resistance, 1/4 W
※ 1: Re-set AP mode with DAQMaster.
※ 2: Re-supply the power to server and client.
※ When power is supplied, this green/red indicator flashes 3 to 4
times in turn.
SCM-US
-
Approx. 41g
S-33
(A)
Photo
electric
sensor
(B)
Fiber
optic
sensor
(C)
Door/Area
sensor
(D)
Proximity
sensor
(E)
Pressure
sensor
(F)
Rotary
encoder
(G)
Connector/
Socket
(H)
Temp.
controller
(I)
SSR/
Power
controller
(J)
Counter
(K)
Timer
(L)
Panel
meter
(M)
Tacho/
Speed/ Pulse
meter
(N)
Display
unit
(O)
Sensor
controller
(P)
Switching
mode power
supply
(Q)
Stepper
motor&
Driver&Controller
(R)
Graphic/
Logic
panel
(S)
Field
network
device
(T)
Software
(U)
Other