- ページ 10
TVレシーバー Galaxy Innovations Gi FLY T2のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Galaxy Innovations Gi FLY T2 20 ページ。
ページを印刷する
4.5. Phone Remote Control
Phone remote control is to use your android
mobile phone to control the receiver, and
your android mobile can be used as remote
control, keyboard, mouse and gravity censor
or use it to change channels.
P 4-5-1
4.5.1.Preparations
1）Install the phone remote control application
and install on your mobile phone, you can
download from below link: http://www.
sdmctech.com/PhoneClient1.4.3.1.apk The
icon 4-5-2：
P 4-5-2
2）Start Sever Side Application
The default is on for the application when
startingthe receiver, user can set the
information in Remote Service. As P4-5-3.
P 4-5-3
3）Network Environment
Before using this software, need to make
sure that the receiver and the android mobile
phone is connected to the same WIFI hotspot.
18
4.5.2.Client Use
After install the client Side software on your
mobile phone, you can start to connect your
phone to the receiver.
1）Connection
Turning on the WIFI of your phone, can click
scan to show the devices nearby as below
picture shows.
P 4-5-4
Select the correct IP address and type in the
password to connect to the receiver.
2）Guide Menu
After connecting successfully, will enter
below menu.
P 4-5-5
The user can select the functions to use.
5.Abnormal phenomenon and ruled out
Fault Phenomenon
Possible reason
After start, without
The power cord didn't connect
any display
or socket without electricity
No Voice and
Play box in standby mode
Images
Wrong signal connection
Channel selection,
showing no signal
Television station has no signal
TV with Voice
Video line goes off
without Images
Audio wire has no connection
Play Box in quiet state
TV images without
Voice
Audio setting is abnormal
Volume , down to minimum
Consistent Voice
Inconsistent Track
with content
Images pause Or
The network speed not enough
Mosaic
or unstable
phenomenon
RCU not aimed the receiving
head of the front penal
Shortage power of Remote
Controller failure
control batteries
Remote control is possibly
damaged
Solution
Connected power plug, ensure normal
voltage electrical outlet
Please press the POWER button of the RCU
switch to the operation condition
Please re-connect signal refer to the system
connection
Please try later when having signal
Please re-connect the video cables
Re-connect the Audio lines
Please press mute button to restore volume
Please enter the audio and video Settings
menu, select the appropriate sound channel
and language
Up the volume
Please setting in the audio and video
Settings menu, select sound channel
Contact to network operator
Please aim at the front's ' SENSOR', then try
again
Please change the batteries
Please send it to the local maintenance
station for checking
19