- ページ 4
セキュリティセンサー Autonics LSE-4A5R2のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Autonics LSE-4A5R2 12 ページ。 2d laser scanners
Autonics LSE-4A5R2 にも： 製品マニュアル (5 ページ)
ページを印刷するLSE-4A5R2
▣ Unit Description
Remote control (RMC-LS, sold separately)
1
2
3
▣ LED Indicator
① ② ③ ④
⑤
Indicator
① Ethernet connection indicator Green
② Power indicator
③ Remote control operation
indicator
④ Operation indicator
⑤ Error indicator
LED indicator by situation
Indicator
①
Status
Comm. cable
◑
connection
1
-
Scanning
2
-
waiting
3
-
sequence
4
-
Scanning
-
Detection
-
Remote
Password -
control
Menu
-
input key
Number
-
waiting
Teaching
-
Output test mode
-
※ ' - ' means nothing to ' :ON, ●: OFF, ◑: Flash'.
Error indicator
① Voltage error: Repeats "◑(0.2 sec) > ◑(0.2 sec) > ◑(0.2 sec) > ◑(1 sec) > ●(2 sec) " operation.
② Temperature error: Repeats "◑(0.2 sec) > ◑(1 sec) > ◑(1 sec) > ◑(1 sec) > ●(2 sec) " operation.
③ Internal error: Flashing of error indicator besides voltage error and temperature error means occurrence of internal error.
※ When error occurs, the power indicator (green) and the remote control operation indicator (green) turn OFF and the operation indicator
(red) turns ON.
D-6
1. LOCK/UN-LOCK
Key
Function
Unlock
Lock
2. Menu key
Key
Function
Monitoring time
Scanning target size
Initialization to factory
default
Sensor position
Activated channel
Sensitivity
Width of the monitoring
zone or concentrated
monitoring zone
Height of the monitoring
zone or concentrated
monitoring zone
Teaching
3. Number key: Setting values can be input to each menu, using 0 to 9 number keys.
Color
Function
Flashes when connected with the PC (Ethernet communication status)
Green
Flashes when power is supplied
Green
Flashes when
Red
Turns on when obstacle is scanned
Orange
Flashes according to the type of error
②
-
●
●
●
●
◑ (every 1 sec)
◑ (every 1 sec)
●
●
●
◑ (flashing in every 1
sec for 35 sec)
◑ (every 0.05 sec)
Description
Unlock to press menu key
Lock remote control
Description
Outputs after monitoring time when an obstacle is scanned
Sets size of the scanning target (approx. 5, 10, 15, 20cm)
Initializes all settings values to their factory default
Sets installation position of the laser scanner (view and left, right,
center)
Sets channel (Ch1, Ch2, Ch3, Ch4) to activate
Adjusts object scanning sensitivity of the laser scanner
Sets width of the monitoring zone or concentrated monitoring zone
Sets height of the monitoring zone or concentrated monitoring zone
Familiarizes with the space where the laser scanner will scan
key is pressed
③
④
-
-
●
●
●
◑ (flashing twice in every 0.5 sec)
-
●
●
◑ (every 0.05 sec)
●
◑ (every 0.3 sec)
●
◑ (every 0.05 sec)
●
◑ (flashing in every 1
●
sec for 35 sec)
-
●
( : ON, ●: OFF, ◑: Flash)
⑤
-
●
●
●
●
●
●
●