- ページ 12

血圧モニター iHealth BP3のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。iHealth BP3 12 ページ。 Fully automatic arm cuff electronic blood pressure dock
iHealth BP3 にも：操作マニュアル (11 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する

electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the

measured field strength in the location in which the BP3L is used exceeds the applicable RF compliance level above, the

BP3L should be observed to verify normal operation. If abnormal performance is observed, additional measures may be

necessary, such as re-orienting or relocating the BP3L.

b Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3V/m.

For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING

Recommended separation distances between portable and mobile RF communications equipment and the BP3L

The BP3L is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The

customer or the user of the BP3L can help prevent electromagnetic interference by maintaining a minimum distance between

portable and mobile RF communications equipment (transmitters) and the BP3L as recommended below, according to the

maximum output power of the communications equipment.

Rated maximum output

power of transmitter

0,01

0,1

100

For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m)

can be determined using the equation applicable to the frequency of the transmitter, where P is the maximum output power

rating of the transmitter in watts (W) according to the transmitter manufacturer.

NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection

from structures, objects and people.

Table 4

Separation distance according to frequency of transmitter

150 kHz to 80 MHz

2 .

0,12

0,38

1,2

3,8

80 MHz to 800 MHz

2 .

0,12

0,38

1,2

3,8

800 MHz to 2,5 GHz

3 .

0,23

0,73

2,3

7,3

BP3L-SMSY01 V1.0