- ページ 10

パーソナルケア製品 DC-Connex DCX-L211のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。DC-Connex DCX-L211 17 ページ。

The versatile Translation Tour system can be programmed to accommodate several

different use case scenarios by changing the CH and ID settings in the L1, L2 and G

units according to the following guidelines.

ACCESS SETTING MODE

Enter SETTING mode

time.

Exit SETTING mode

main display is visible.

Change SETTING preferences for Channel number, ID (L1), Side Tone Level or

Microphone gain (L1, L2) when in SETTING mode by following the below method:

Enter SETTING mode.

channel number. This is the Channel setting option.

Press the Up

Press the MODE

Press the Up/Down buttons to select preferred number in each setting option.

Exit SETTING mode by long pressing Up/Down buttons at the same time.

L1 & L2 have the ability to change Sx (Sidetone) and Cx (Microphone gain).

the User's manual on dc-connexsolutions.com/support for more detail.

OPERATION

by long pressing the Up

by long pressing the Up/Down buttons at the same time until

will be flashing in the display along with the current

and Down

button to move to the next SETTING option.

and Down

buttons to change the Channel number.

buttons at the same

Refer to