- ページ 9
血圧モニター iHealth BP7のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。iHealth BP7 16 ページ。 Wrist
iHealth BP7 にも： オーナーズマニュアル (16 ページ), クイック・スタート・マニュアル (4 ページ)
ページを印刷する
BATTERY HANDLING AND USAGE
Do not change the battery. If the battery can no longer be charged, please contact Customer
Service.
• When charging is needed, please connect the monitor to a power source. The monitor can
work normally while charging.
• When the monitor is connected to an iPod touch, iPhone, or iPad, the battery volume will be
displayed on the iPod touch, iPhone, or iPad screen. If the power is less than 25%, please
charge the battery. The monitor will not work until the battery has enough power.
• When you charge the monitor, the LED will display with different colors indicating the
charging status. See the table below for details.
• It is suggested that you charge the battery when the battery is less than 25%. Overcharging
the battery may reduce its lifetime.
Lithium battery replacement by inadequately trained personnel could result in a hazard
such as a fire or explosion.
Do not plug or unplug the power cord into the electrical outlet with wet hands.
If the AC adapter is abnormal, please change the adapter.
Do not pull out the adapter when you are using the monitor.
Do not use any other type of AC adapter as it may harm the monitor.
The monitor, cable, battery and cuff must be disposed of according to local regulations
at the end of their usage.
：
Note
The battery has limited charge cycles and may eventually need to replaced by an
iHealth service provider. Battery life and charge cycles vary by use and settings.
Monitor Status
Charging
Fully charged
Low battery
Abnormal state
TROUBLESHOOTING
PROBLEM
Low Battery
Display reads
"ERROR"
Status Indicator
Flashing green light
Steady green light
Flashing red light (for a few seconds)
Steady red light
POSSIBLE CAUSE
Battery is less than 20%
Blood pressure is outside
of measurement range
SOLUTION
Charge the battery
Retest, make sure your blood
pressure is within measurement
range
8