- ページ 9

血圧モニター iHealth Ease BP3LのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。iHealth Ease BP3L 20 ページ。

CARE AND MAINTENANCE

1. If this monitor is stored near freezing temperatures, allow it to return to room temperature before use.

2. If the monitor has not used for a long time, please be sure to fully charge it every month.

3. It is recommended that product performance be checked every 2 years or after each repair. Please contact

the iHealth Customer Service Center to do so.

4. No monitor component needs to be maintained by the user. The circuit diagrams, component part lists,

descriptions, calibration instructions, or other information which will assist the user's appropriately qualiﬁed

technical personnel to repair those parts of the equipment which are designated for repair can be supplied

by the iHealth technical department.

5. Clean the monitor with a dry, soft cloth or a moistened and well wrung soft cloth using water, diluted

disinfectant alcohol, or diluted detergent.

6. The monitor can maintain the safety and performance characteristics for a minimum of 10,000

measurements or three years of usage, and the cuﬀ integrity is maintained after 1,000 open close cycles.

7. The battery can maintain the performance characteristics for a minimum of 300 charge cycles.

8. It is recommended that if the cuﬀ is used in a hospital or a clinic, it be disinfected twice a week. Wipe the

inner side (the side that contacts skin) of the cuﬀ with a soft cloth lightly moistened with Ethyl alcohol

(75-90%). Then air dry the cuﬀ.

Do not drop this monitor or subject it to strong impact.

Avoid high temperature and direct sunlight. Do not immerse the monitor in water as this will result in

damage to the monitor.

Do not attempt to disassemble this monitor.

Battery replacement should only be performed by a qualiﬁed iHealth technician. To do otherwise will void