- ページ 6

血糖測定器 iHealth BG5のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。iHealth BG5 16 ページ。 Wireless smart gluco-monitoring system
iHealth BG5 にも：クイック・スタート・マニュアル (13 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (7 ページ)

ページを印刷する

PARTS AND DISPLAY INDICATORS

Glucose Meter

MINI USB PORT

Charge the meter through

provided USB cable.

LED DISPLAY

Glucose test results.

symbols and messages

appear here.

STRIP PORT

Insert the test strip

into the strip port to

automatically turn on

the meter.

Memory Button

Located in the side of the meter,

It is used to turn on the meter and

view past test results.

Eject Button

Located at the back side of the

meter. It is used to automatically

remove the test strip .

Blood Sample Symbol

Flashes when it is ready

to apply the sample.

CTL SYMBOL

Appears when doing a

control test and indicates

that the result won't be

stored in the memory.

LOW BATTERY SYMBOL

Appears when the battery is low.

Blood Glucose Test Strip

Each test strip is intended for single use only and should be

discarded immediately after use Test strips consist of the

following parts:

NOTE: Only use iHealth Blood Glucose Test Strip with the

iHealth Wireless Smart Gluco-Monitoring System (BG5).

Other test strips may produce inaccurate results.

SETUP PROCEDURES

Prior to the ﬁrst use, set the meter time by connecting the

meter with your iOS device via Bluetooth. Complete the

steps below to have your desired time settings saved in the

meter.

BLUETOOTH SYMBOL

Appears when the meter is

connected with iOS device

through Bluetooth function.

Test Result Display

Displays glucose results.

MEASUREMENT UNIT

Appears with the test result

either in mg/dL or mmol/L.

Absorbent Hole

Conﬁrmation window

Test strip handle

Contact bars