- ページ 6

メディア・コンバーター GALCO EL110TのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。GALCO EL110T 8 ページ。 Etherwan media converters

Installation

This chapter gives step-by-step installation instructions for the

Converter.

Selecting a Site for the Equipment

As with any electric device, you should place the equipment where it will

not be subjected to extreme temperatures, humidity, or electromagnetic

interference. Specifically, the site you select should meet the following

requirements:

- The ambient temperature should be between 32 and 113 degrees

Fahrenheit (0 to 45 degrees Celsius).

- The relative humidity should be less than 95 percent, non-condensing.

- Surrounding electrical devices should not exceed the electromagnetic field

(RFC) standards for IEC 801-3, Level 2 (3V/M) field strength.

- Make sure that the equipment receives adequate ventilation. Do not block

the ventilation holes on each side of the equipment.

- The power outlet should be within 1.8 meters of the equipment.

Connecting to Power

This Converter is a plug-and-play device.

Connect the supplied AC to DC power adaptor to the receptacle on the

rear panel of the converter, and then attach the plug into a standard AC

outlet.

User's Manual

Media Converter