- ページ 3

室内装飾品 Autonomous L- Shaped DeskのPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。Autonomous L- Shaped Desk 4 ページ。 Adjustable height double desk

8. With a partner, lay the Desk Top (D) upside down on the ground and attach the

Beams using 20 (Y).

9. Attach the

Control Box (F)

to the bottom

of the table

using 2 (Y).

10. Attach Control Switch (K)

into its corresponding holes

near the edge of the bottom of

the desk using 2 (Y1).

11. Connect the Control Box (F) to corresponding

Control Switch (K), and Legs cable (L). Repeat process

with the Desk on other side.

NOTE: Make sure no obstacles are in the desk's path. Make sure cords are a length that

will accommodate the change in height.

13. Before use, reset each Control Box following these instructions on both sides.

IMPORTANT! You must RESET the desk prior to use.

Press up and down

buttons at the same

time until it beeps and

goes down to the

lowest level

Release both buttons

and press down button

until exact height

appears on display.

12. Plug the Power Cable (K) into Control Box (F)

and then into a power outlet. Repeat process with

the Desk on other side.

YOUR DESK IS READY TO USE.