- ページ 10

トランシーバー Dynascan PMR446のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dynascan PMR446 11 ページ。 Handheld transceiver
Dynascan PMR446 にも：取扱説明書 (16 ページ), 取扱説明書 (10 ページ)

ページを印刷する

time limit (which is pre-set by programming software), the radio will stop transmitting and an alarm will sound. To

stop the alarm, release the [PTT] button and the radio will return to reception or standby mode.

ix.

TIME OUT ALERT (TOA):

When the transmission time is about to reach the time limit, a tone will sound to alert you. This function can be

set using programming software.

BUSY CHANNEL LOCKOUT (BCL):

You can turn on/off the busy channel lockout function of each channel using programming software. When the

current channel is busy, transmission will be blocked and a tone will sound to alert you.

xi.

BATTERY LEVEL:

The battery power is divided into 5 levels from 0-4 (4 is the highest level). When the battery power is too low, a

double beep sound will alert you.

The battery power levels are displayed in the following way:

10. TECHNICAL SPECIFICATIONS

Frequency range:

Number of channels:

Antenna:

Transmission power:

Channel spacing:

Modulation type:

QT tones:

DQT tones:

Frequency stability:

Sensitivity:

Distortion:

Power supply:

Working temperature:

Duty cycle:

Dimensions (with battery pack):

Weight (with battery pack):

Note:

The technical specifications of this radio cannot be modified through keyboard use.

446.00625 MHz – 446.09375 MHz

8 (can program up to 99 channels with

different QT and DQT signalling)

Internal and built-in

0.5 W

12.5 kHz

FM (11K0F3E)

±2.5 ppm.

<0.2 dBμ (12 dB S/N)

≤3 %

3.7 V/1800 mAh Li-Ion battery pack

-20 ºC to 55 ºC

100%

83 (H) x 50 (W) x 23 (D) mm

90g