- ページ 4

トランシーバー Dynascan PMR446のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dynascan PMR446 10 ページ。 Handheld transceiver
Dynascan PMR446 にも：取扱説明書 (11 ページ), 取扱説明書 (16 ページ)

ページを印刷する

3.- UNPACKING AND CHECKING THE EQUIPMENT:

Carefully unpack the transceiver. We recommend that you identify the items listed

in the following table before discarding the packaging. If any items are missing or

damaged, contact with your salesperson immediately.

Supplied accessories:

PMR-446 Transceiver

Li-Ion battery packs (1000 mAh).

Belt clip.

AC/DC adapter.

Cable.

Desktop battery charger.

Hand strap.

Instruction Manual.

4.- GETTING STARTED:

4.1.- CHARGING THE BATTERY PACK:

The battery pack is not fully charged at the factory, charge it before use.

Initially charging the battery pack after purchasing the transceiver or extended

storage (greater than 2 months). The battery pack does not reach full capacity until

the charging/discharging cycle is repeated two or three times.

Charging procedure:

Cautions:

- Don´t recharges the battery pack if it is fully charged; this procedure will shorten

its life and may be damaged.

- After charging the battery pack, remove it from the desktop battery charger.

Charging the battery pack for more than 5 days may reduce the battery pack life

due to overcharging.

Notes:

- Charge the battery pack in an environment with a temperature range between 5ºC

and 40ºC. Charging outside this range may not fully charge the battery.

- Switch off the transceiver if you are charging the battery pack with the battery

Item

English - 4 -

Quantity