- ページ 8
サービス機器 Autool CT-200のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Autool CT-200 18 ページ。 Injector cleaner & tester
Autool CT-200 にも： ユーザーマニュアル (14 ページ), ユーザーマニュアル (14 ページ)
ページを印刷する
seconds.)
2. System will automatically simulate 3 times accelerating cycle from 750
RPM to 7500 RPM to test the injection condition of the injector.
06 Shifting Speed Test
1) Press Left or Right Arrow key to select Shifting Speed Test.
2) Press RUN key.
3) The next steps are the same as what listed in 02 Idle Speed Test.
NOTE：
1. System pressure, working time and pulse width are set up
automatically by system itself. (Default working time cycle is 10
seconds.)
2. System will automatically simulate 3 times of engine condition of 750
RPM, 4000RPM, and 7500 RPM to test the injection condition of the
injector.
07 Leakage Test
1) Press Left or Right Arrow key to select Leakage Test.
2) Press RUN key.
3) The next steps are the same as what listed in 02 Idle Speed Test.
NOTE:
1. Default pulse width is 3ms.
2. System simulates 0.3Mpa system pressure to test leakage.
08 Idling Spray Value Test
1) Press Left or Right Arrow key to select Idling Spray Value Test, then
press RUN key.
- - 8 - -