- ページ 11

サービス機器 Autool CT-200のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Autool CT-200 14 ページ。 Injector cleaner & tester
Autool CT-200 にも：マニュアル (18 ページ), ユーザーマニュアル (14 ページ)

ページを印刷する

to the pressure specified by the factory to be inspected, most

Beyond the original factory pressure of 10%), observe

whether the injector is dripping.

After the test is completed, the system will automatically stop

and beep with a buzzer.

Note:

The general requirement is no more than one drop (or

according to technical standards) within one minute.

The system internal setting time defaults to 1 minute.

On-Vehicle cleaning

The hose line connection of the engine with return hose is

shown as in Fig.06.

Disconnect the connections of fuel supply hoses (C

、

fuel return hoses (A

B) of the engine fuel system (wrap the

connector with towel when disconnecting the connector).

Choose proper connectors and connect them to the B end

and C end separately, and then connect the other ends to

corresponding return hose and outlet hose of the unit. See

Fig.06.

Connect the disconnected other ends (A、 D) with proper

hose, or remove the fuel pump fuse, or disconnect the power

cable of engine fuel pump.

Fig.06

1-C100 Injector Cleaner & Tester; 2-Engine; 3- Fuel-return hose

from engine; 4- Fuel-inlet hose to engine; 5-Auto filter; 6-Engine

fuel supply hose; 7-Engine fuel return hose; 8- Auto fuel pump;

9-Auto tank

、

D) and