- ページ 6

洗浄装置 Autool CT-200のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Autool CT-200 14 ページ。 Injector cleaner & tester
Autool CT-200 にも：マニュアル (18 ページ), ユーザーマニュアル (14 ページ)

ページを印刷する

Time/time adjustment button: adjust the working time of the injector and

the number of injections.

● Press up to increase the working time of the injector/the number of

injections.

● Press down to reduce the working time of the injector/the number of

injections.

Start button: Press to execute the selected work item.

Pause button: temporarily stop the selected work item after pressing.

Stop button: stop the selected work item and return to the selected work

item.

Function selection button: select work item.

● Press up to select work item.

● Press the down to select the work item.

Pressure adjusting knob: adjust pressure change.

● Turn clockwise to increase the pressure value.

● Turn counterclockwise to decrease the pressure

3 Operation process

3.1 Ultrasonic cleaning

Ultrasonic cleaning is to use the penetrating and cavitation shock waves generated

when ultrasonic waves propagate in the medium, and powerfully clean objects with

complex shapes, cavities and pores to completely remove stubborn carbon

deposits on the fuel injector.

3.1.1 Preparation

1) Remove the fuel injector from the vehicle and check whether its rubber seal is

damaged. If it is damaged, it should be replaced in time before the cleaning test to

avoid leakage during the test. Then put the fuel injection nozzle into the cleaning

agent, carefully remove the external grease and wipe it with a soft cloth.

2) Turn on the power and turn on the power switch on the side of the main unit.

3) Put the cleaning bracket in the accessories into the ultrasonic cleaning tank, and

place the wiped fuel injector in the cleaning bracket positioning hole of the

ultrasonic tank.

3.1.2 Methods and steps

1) Add an appropriate amount of cleaning agent to the ultrasonic tank and

spread the cleaning agent over the bottom of the cleaning stand.