- ページ 2

リモートスターター Autopage RF-1055KEのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Autopage RF-1055KE 2 ページ。 Part 1
Autopage RF-1055KE にも：送信機のプログラミング (1 ページ)

ページを印刷する

PARKING LIGHT INDICATORS

PARKING LIGHTS

Operation

1 Flash + 10 sec on

Locked / The parking lights will remain "on" for 10 seconds

2 Flashes + 30 sec on Unlocked / The parking lights will remain "on" for 30 seconds

Continuous Flash

Panic Mode Engaged (30 Sec.)

10)

STARTER INTERRUPT CIRCUIT (OPTIONAL)

The vehicles starter circuit may be interrupted for additional protection when the System is

locked. Use of the RK-1 Starter Interrupt Relay kit is recommended.

11)

TRANSMITTER PROGRAMMING

In the event, you should need to add or replace a Remote Control Transmitter, it is

important that you follow the instructions below.

Note:

Each step must be performed within 10 seconds of the previous step otherwise the System

will exit the programming mode.

Enter:

Turn the vehicles ignition to the "ON" position

Push the valet switch 3 times. There will be 1 long chirp and 1 short chirp

You are now ready to program the Remote Control Transmitter(s).

Programming the Remote Control Transmitters:

Press any button on the first transmitter. There will be 1 short chirp.

Within 10 seconds push any button on the second transmitter. There will be 2 short chirps.

Exit:

Turn the vehicles ignition key to the "OFF" position, Or

Leave for 10 seconds; there will be 3 long chirps to confirm exit.

Note:

The Keyless Entry System will only retain the last 4 Remote Control Transmitters

programmed. If the Remote Transmitter memory is exceeded, the System will start deleting

RemoteTransmitters from memory in chronological order.

12)

SECOND VEHICLE TRANSMITTER PROGRAMMING

Your AutoPage Keyless Entry System's Remote Control Transmitter can be utilized to

control a second vehicle equipped with an RF1055KE, RF-305 or RF-405.

All programming parameters will be the same except for the following:

Prior to pushing any button on the Remote Control Transmitter. Select the Green side shift

button first.

While the LED is illuminated, press any button on the Remote Control Transmitter.

Note:

The System will only learn up to 4 remote transmitters.

13)

SECOND VEHICLE OPERATION

Your AutoPage Keyless Entry Systems Remote Control Transmitter can be utilized to

control a second vehicle equipped with an RF-1055KE. If your Remote Control Transmitter

is programmed to a second vehicle, the remote transmitter will operate as follows:

Push the Green side shift button on the right side of the Remote Transmitter, the System LED

will illuminate for 3 seconds.

While the System LED is illuminated, push the desired button operation. For Expample: To

Lock the second vehicle, simply push the Green side shift button once then push the Lock

button while the LED is illuminated.

14)

AUXILIARY FUNCTION (OPTIONAL

You may use the CAR button on your Remote Control Transmitter for a separate function.

For example, if your vehicle is equipped with an elec tronic trunk release, the Keyless Entry

System can be interfaced with it and can electronically release your trunk by pressing the

CAR button on the Remote Control Transmitter.

Function

)

RF-1055KE

PROFESSIONAL KEYLESS ENTRY SYSTEM

OPERATIONS MANUAL

THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY