- ページ 5

リモートスターター Autopage RST-2050KEのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Autopage RST-2050KE 8 ページ。 Professional remote car starter & keyless entry

Operating during remote start function:

The remote start can function while the vehicle is in the Locked

secured mode. When the engine is running from the remote start

you can insert the key into the vehicle's ignition and turn the key

to the run position. Tap the brake pedal, the remote start will

shut down. The engine will remain running from the key in the

ignition.

REMOTE START SAFTEY FEATURES

If the remote start system detects any of the following

conditions prior to remote starting or while the vehicle is

running, the system will not start or will shut down the system

immediately if running.

SAFTEY FEATURES:

a) The vehicles hood is opened.

b) The vehicles brake pedal is pressed.

c) The vehicles engine exceeds 2000 RPM idle speed.

d) The vehicles gearshift lever is in another position other

Park or Neutral.

e) The programmable run time has elasped.

! Additional installation maybe required.

" When programmed to Tach Sensing only.

DIAGNOSTIC PARKING LIGHTS CODES

The system has a built-in diagnostic routine which

indicates why the unit turned the engine off. The

parking will flash 1 to 5 times to indicate which of the

following caused the engine to shut off or not start from

remote transmitter.

CODES:

1. 1 Flash ---- RPM fail

2. 2 Flash ---- Voltage fail

3. 3 Flash ---- Hood pin fail

4. 4 Flash ---- Brake Light fail

5. 5 Flash ---- Nuetral Saftey fail

(Gray wire not grounded)