- ページ 2

カーアラーム Autopage Car-Pro CPX-2500のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Autopage Car-Pro CPX-2500 2 ページ。 Professional vehicle security

TRANSMITTER PROGRAMMING

In the event, you should need to add or replace a transmitter, it is important that you follow the

instructions below. Note: Each step must be performed within 10 seconds of the previous

step otherwise the system will exit the programming mode.

Enter:

a. Turn the ignition key to the "ON" position

b. Push the valet switch 6 times. There will be 2 long chirp and 1 short chirp

c. You are now ready to program the transmitter(s).

Programming the transmitters:

a. Press any button on the first transmitter. There will be 1 short chirp.

b. Within 10 seconds push any button on the second transmitter. There will be 2 short

chirps .

Exit:

a. Turn the ignition key to the "OFF" position, Or

b. Leave for 10 seconds; there will be 3 long chirps to confirm exit.

Note: The system will allow programming of 4 transmitters. If more than 4 transmitters

are programmed, the system will only keep the last 4

SHOCK SENSOR

Your Car-Pro security system includes a shock sensor designed to trigger the alarm from impact

to the vehicle, such as a window being broken or impact to the vehicle doors. If sensitivity

adjustment should become necessary consult your local dealer. Do not attempt to do this on

your own!

STARTER DISABLE FEATURE (OPTIONAL)

If installed with your security system, this feature is designed to prevent a thief from starting your

vehicle once they have broken in to it.

1815 West 205

Torrance, California 90501-1525

Main Office: 310-618-2002

Car-Pro

Autopage Inc.

Street

Car-Pro

PROFESSIONAL VEHICLE SECURITY

OPERATIONS MANUAL

MODEL

CPX-2500

THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY!