- ページ 7

セキュリティシステム Autopage RF-525 LCDのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Autopage RF-525 LCD 20 ページ。 Professional 2-way lcd 6 channel security system with two-way serial port data link

ページを印刷する

The vehicle doors will automatically lock after passive arming cycle has been

completed.

PASSIVE ARMING BY-PASS: While the system disarmed, Press the

twice, the security will respond with [1] chirp and LED will turn "ON". The security

system will remain in this temporally state for as long as you wish. To exit passive

by-pass, press the transmitter

status.

ACTIVE DISARMING – UNLOCK & DISARM:

Press

button on the transmitter.

The siren will chirp twice and parking light flash twice to indicating that the security

system is now disarmed. The vehicle's door will unlock and dome light turns on for

30 seconds upon disarming when interfaced with the security system.

System Disarm

Doors Trigger

Shock SensorTrigger

Ignition

TAMPER DISARMING: If alarm triggered, upon disarm the system, siren chirp 4

times, parking light flash 3 times.

PATHWAY ILLUMINATION: This feature turns the parking light "ON" for 30 seconds

upon a unlock signal and for 10 seconds upon the lock signal.

TWO STEPS DOOR UNLOCK: ( Optional ) This feature will independently unlock the

driver's door only when disarming the security system. Pushing the

second time within 3 seconds will unlock the other doors.

AUTOMATIC RE-ARM: If this feature is selected, the security system will

automatically re-arm itself in 60 seconds after disarming with remote transmitter.

Automatic rearm will cancel if any door is opened before the 60 seconds timer has

elapsed.

DISARMING WITHOUT A TRANSMITTER

The Override function may be used if the remote transmitter is lost or inoperative.

1. Enter the vehicle and turn the ignition switch to 'ON' position. (Alarm will sound.)

2. Within 10 seconds press the valet switch.

button and the system will return to normal

Trunk/Hood,Trigger

Trigger

Clear The Flash Icon:

Press the

button 3

times within 3 seconds will

clear the flash icon on the

LCD screen transmitter.

button

button a