- ページ 5

自転車アクセサリー Galeo GaleoのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Galeo Galeo 11 ページ。 Bike-mounted theft prevention and recovery device

2. Adjust the size of the mount opening to fit your handlebar size.

CAUTION: The pin in the hinge of the mount is loose and may fall out when changing the mount

opening size. Do not lose the hinge pin.

If you have 22.2 mm or 25.4 mm handlebars, leave the pin in the topmost hole (the hole closest to

•

the device).

•

If you have 31.8 mm handlebars, move the pin to the bottom hole.

a. Locate the pin in the hinge of the mount. Push the bottom piece of the mount up toward the unit

until the bottom piece pops off and the pin is accessible.

b. Remove the pin and place it in the uppermost hole.

c. Re-place the pin into the hinge to re-attach the bottom piece of the mount.

3. Open the mount and place it around the bike's handlebars. Orient Galeo so that the logo faces the sky.

4. On the side opposite of the hinge, thread the included screw from the bottom of the mount up toward

the unit to secure the mount to the bike. Tighten the screw with the provided tool.

600890-000072, rev 1.0

Galeo User Guide

Page 5 of 11