- ページ 9
おもちゃ DynaStar Rockets LexxJetのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DynaStar Rockets LexxJet 10 ページ。
ページを印刷するPainting Instructions
37. After all the glue has completely dried,
you may now paint your LexxJet model rocket.
Roll a piece of paper and insert it into the
aft end of the body tube so you can hold the
model while painting it. For best results, paint
the model with primer before using the un-
dercoat paint color, which is white. Follow the
directions on the paint can, and always paint
outdoors with the wind against your back. Let
the paint harden at least 24 hours before pro-
ceeding. When the white is dry, you can paint
the model as shown here, or using your own
favorite colors. There is a diagonal marking
guide in the pattern sheet 11.
38. Cut around the perimeter of the de-
cal with a pair of scissors. Peel off the paper
backing, and affix the decal in place on the
model. Use the picture on page 1 for decal
placement.
Launching the LexxJet
The motor matrix shown here was developed
using the RockSim software (www.RockSim.
com). Initial conditions: slightly breezy (3-
7mph wind), straight up launch angle and a 48
inch (121.9 cm) long launch rod. You can use
RockSim to find other motor combinations that
will work well in the DynaStar LexxJet rocket
kit. Download the RockSim file for this kit and
a free trial-version of RockSim at: www.Apog-
eeRockets.com/LexxJet.asp
Launch Supplies Needed
To launch your rocket you will need the follow-
ing supplies:
u A model rocket launching system.
u Flame resistant recovery wadding (8
sheets).
u Recommended 24mm Diameter Rocket
Engines — see the motor matrix.
Rocket Preflight
A. Loosely crumple and insert 8 sheets of
recovery wadding into the body tube.
B. Carefully fold the parachute and insert it
into the tube with the shock cord.
Motor Matrix: How High Will The LexxJet Fly?
Motor
Produced
Type
by:
C11-3
Estes
D12-5
Estes
E9-4
Estes
E15-4
Aerotech
E30-7
Aerotech
E18-4 RMS
Aerotech
E28-4 RMS
Aerotech
F12-5 RMS
Aerotech
F24-7 RMS
Aerotech
F35-8 RMS
Aerotech
F39-9 RMS
Aerotech
1
Spike
Canopy.
Roll Sides Inward.
Estimated Altitude
(feet)
123.6 ft
377.4 ft
663.4 ft
1112.3 ft
1090.3 ft
1061.4 ft
1079.9 ft
1168.26 ft
1587.1 ft
1461.2 ft
1313.29 ft
2
Fold
Peak
Down.
Lay Excess String
on Top of Canopy.
5
4
Loosely Wrap Any
Excess String around
Canopy And Insert.
Estimated Altitude
(meters)
40.42 m
115.04 m
202.21 m
339.01 m
332.31 m
323.52 m
329.14 m
356.09 m
389.04 m
445.37 m
400.29 m
3
Page
9