- ページ 12

Figure 3-3 - Click OK

3.3. STEP 3: Set the E2 IP Ad-

dress in FSD

To set up the FSD, the E2's IP address or Hostname

that the FSD will communicate with must be entered.

When the FSD is powered up for the first time, the

Start-up or Boot Loader screens will appear.

1. Log on by entering the passcode (default

code is 400) into the blank field on the

first boot loader screen (Figure 3-4) and

touch Configure. (Touching the inside of

this field will toggle the virtual key-

board.)

Figure 3-4 - First Boot Loader/Startup Screen

2. On the second boot loader screen,

(Figure 3-5) enter the IP Address or

Hostname of the E2 that the FSD will be

communicating with. (If using a Host-

name for E2 instead of an IP Address,

contact your IT administrator for the

Hostname.)

6 • FSD Installation and Operation Guide

Figure 3-5 - Second Boot Loader/Startup Screen

3. Touch Apply.

4. Reboot the unit by cycling power.

026-1400 Rev 2 12-APR-10