- ページ 7

時計 Galeria Selection 4017805424975のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Galeria Selection 4017805424975 12 ページ。 Radio projection clock



The time zone starts flashing. Press the UP (B4) and DOWN (B3) buttons to set the time

zone. For use in Germany, leave the setting at "00". Confirm your settings by pressing

the MODE (B6) button.

Note: (This function is useful when you are located within the DCF77 reception area but

wish to use another time zone, for example Great Britain.) In order to take the time

difference into account, you can rectify the existing difference manually.

Time



The hour indicator starts flashing. Press the UP (B4) and DOWN (B3) buttons to set the

hours. Confirm your setting by pressing the MODE (B6) button.

The minute indicator starts flashing. Press the UP (B4) and DOWN (B3) buttons to set

the minutes. Confirm your setting by pressing the MODE (B6) button.

The manual setup has been completed by then.

Make sure: If there is no function within 30 seconds, the system returns to regular time display

mode. All settings configured that far will be saved.

Alarm settings

Setting the alarm time (alarm)

1. Press the MODE (B6) button once to switch to alarm mode (AL).

2. Press and hold the MODE button (B6) for 2 seconds until the hour display of the alarm

time starts flashing. Press the UP (B4) and DOWN (B3) buttons to set the hours first.

Confirm your setting by pressing the MODE (B6) button.

3. The minute indicator of the alarm time starts flashing. Press the UP (B4) and DOWN

(B3) buttons for setting the minutes. Confirm your setting by pressing the MODE (B6)

button. Proceed as follows to return to normal time display mode:

NOTE: The alarm function is saved, but will not be activated automatically.

Switching the alarm on and off.

1. Press the ALARM button (B5) to activate the alarm function. The display will show the

alarm function icon (A2).

2. Press the ALARM button (B5) again to deactivate the alarm function. The alarm function

icon (A2) turns off.

Displaying the set alarm time

1. When in normal time display mode, briefly press the MODE button (B6) to display the set

alarm time.

2. Briefly press the MODE button (B6) again to return to normal time display mode.

OPERATION MANUAL

RADIO PROJECTION CLOCK

EAN 4 0 1 7 8 0 5 4 2 4 9 7 5