- ページ 2

ペットケア製品 High Tech Pet Power Pet PX-1のPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。High Tech Pet Power Pet PX-1 13 ページ。 Fully automatic pet door

ページを印刷する

ALL NEW DESIGN!

After selling thousands of our original POWER PET, PP models we are very pleased to introduce our All New,

completely redesigned and restyled PX Model. We listened to the feedback of hundreds of customers and

threw in a few ingenious, new ideas of our own to bring you the ultimate combination of security, style and con-

venient features.

The PX model, which features an extremely slim design, is less than 2 inches deep. This allows it to be

mounted flush to your door or wall. You cut a hole only as large as the door panel itself, then mount your

POWER PET door in front of the opening. You will find it is actually easier to install a POWER PET door than a

conventional pet door and certainly easier than installing a "between the studs type door"

The PX is constructed of an ultra-high strength ABS composite housing with a bullet-proof Lexan plastic door

panel, giving you and your pet the ultimate in security. The Lexan panel is mounted on a sliding, air-tight seal

for the best wind, rain and foul weather protection of any pet door made.

This new, absolutely state of the art design represents unquestionably the most advanced, most reliable, most

stylish pet door made anywhere. In fact, your new POWER PET Fully Automatic Pet Door will be the most

sophisti cated appliance your pet will ever own!

Your POWER PET door package includes:

• One Pet Transmitter Collar (Model MS2 Standard Ultrasonic Transmitter Collar)

• 110 volt AC Adapter (connects to either Power Input Jack on edge of inside frame)

• Pre-Fabricated Outside Frame

• All Required Hardware

(Wall Adapter Tunnel, Rechargeable Battery, Battery Charger Kit and Extra Transmitter Collars are sold separately.)

Ultrasonic

Collar

Directional

Signal

INSTALLATION

MOUNTING YOUR POWER PET DOOR

Your POWER PET door mounts flush to any door or wall. The hardest part of installing the POWER PET door is cutting

the hole. If the unit is to be mounted in a door up to 1 ¾" thick there is no framing necessary. The pre-made Outer Frame

that came with your POWER PET door will provide a finished look to the opening. If you are installing your POWER PET

door in a wall, it is advisable to build a frame around the opening or order our convenient WALL ADAPTER TUNNEL. The

hole dimensions given are for the finished opening not including the frame. Dimensions of the frame you build should be

added to the opening size to determine the final size of the hole you cut in your wall.

______________________________________________________________________________________________________________________________________

PET COLLAR OPERATED

Only the amazing POWER PET door uses our Patented directional

ultrasonic sensing system. This system has great advantages over

magnetic or radio transmitter collars.

Magnetic collars have a very limited range making it tough to train the

pet to operate the door. Radio systems have good range but open

whenever the animal is within that range, even if the pet is sitting,

sleeping or just wandering by.

The Power Pet's directional ultrasonic system overcomes these prob-

lems. The Pet worn ultrasonic collar emits a highly directional signal,

which is received by the microphone only when your pet is directly

facing the door opening. The unit is not likely to trigger if your pet is

just wandering by.

Typically the ultrasonic signal is bounced off the ground in the direction

Microphone

which your pet is facing. This means that surfaces which are highly

reflective such as tile and linoleum will result in a longer working range

than acoustically absorbent surfaces such as carpeting.

www.hightechpet.com

High Tech Pet Products, Inc.