- ページ 2
芝生とガーデン用品 Autopot easy2GO KitのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Autopot easy2GO Kit 2 ページ。
ページを印刷する
easy2GO contents
1x AQUAvalve cover
1x AQUAvalve
1x circular spirit level
1x 6mm golf filter
1x 6mm top hat grommet
Suggested layouts
Using 6mm golf filter
Minimum pot size 5 litres
Tank
Maximum tray size 1.2m/sq
Using 16-6mm inline filter
and standard hosepipe
Reservoir
6mm pipe
6mm golf filter
16mm pipe
16-6mm inline filter
6mm top hat grommet
AQUAvalve
Minimum tray depth 30mm
Assembly instructions
1
1x 16-6mm inline filter
3
1 x 1.5m 6mm pipe
5
Connection Option 2
7
For ease of assembly lay out the contents of your easy2GO kit.
Then place your flat tray into position.
Minimum recommended tray depth is 30mm.
Maximum tray size 1.2m/sq.
Ensure your tray is level.
Place AQUAvalve cover over the AQUAvalve.
The AQUAvalve and cover should be placed
directly onto the tray.
Never sit the AQUAvalve and cover on
capilliary matting.
Cut 6mm pipe to appropriate
length if required.
Connecting to a reservoir tap.
A 10cm length of standard garden hose is
required. Push hose onto tap.
Push 16/6mm inline filter onto hose. Attach
6mm pipe to the end of filter.
Clean filter once a month by simply
unscrewing and removing the internal filter,
with the tap turned off.
2
Remove threaded collar from AQUAvalve.
Push one end of the 6mm pipe through
the collar and attach the pipe to
AQUAvalve nozzle.
Then replace AQUAvalve collar.
4
Ensure the circular spirit level indicates the
tray is level, adjust if required.
Place plant pots into tray.
Connection Option 1
6
Connecting your easy2GO Kit to a simple
plastic container.
Drill a hole into the side of the container,
25mm from the base. Use a 3-5mm drill bit
to create a pilot hole and a 10mm drill bit for
the final hole.
Insert 6mm Top Hat Grommet into 10mm
hole, push 6mm pipe through the Grommet
and push 6mm filter into 6mm pipe.
8
Fill reservoir with water and
add liquid feed if required.
Organic feeds should NOT be poured
in the reservoir. Organic fertilisers
should be poured directly in to the
pots/tray from a watering can.
Note: The easy2GO kit can be placed anywhre in the tray