- ページ 5

コントローラー Dynatech QUASAR T25 A3のPDF 使用説明書およびメンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Dynatech QUASAR T25 A3 9 ページ。 Ucm unit
Dynatech QUASAR T25 A3 にも：使用説明書およびメンテナンス・マニュアル (8 ページ)

ページを印刷する

Instruction Manual: SD-Box + QUASAR T25 A3 + ASG UD

Date: 25-02-20

Revision: 00

•

SD-BOX´S input signals are typical of the installation controller. As a result, response times of the controller

components are inherent to it even though the total response times of the SD-BOX + QUASAR T25 A3 +

ASG UD unit are considered as standard.

•

In the case of checking the installation or carrying out a manual rescue, it must be checked that the SD-BOX

is set at the correct operation mode for each of these situations so as to prevent unwanted jamming in the

safety wears.

•

The parking or anti-creep system incorporated in the QUASAR T25 A3 governor to detect uncontrolled

movements, must always include a 24V coil in order to operate correctly along with the SD-BOX.

3 DESCRIPTION OF THE UNIT

3.1 COMPONENTS OF THE SYSTEM

The components making up the system are:

•

CONTROL SYSTEM

The SD-BOXoperates as a control systemSD-BOX´S SD-BOX.

SD-BOX´S GOVERNOR– SAFETY GEAR – DRIVING BAR

The QUASAR T25 A3 model two-way governor, operates as a UCM actuator.

SD-BOXFinally, the two-way safety gear, ASG UD model by Dynatech incorporated in the QUASAR T25 A3, will

operate as a braking device.

3.2 OPERATION AS A UNIT

As can be seen in FIGURE 2, the SD-BOX electronic device is connected to the installation controller and the

QUASAR T25 A3 governor's parking system. SD-BOX connection is described in the SD-BOX´S manual for use and

maintenance.

The governor in the Quasar-T25 assembly is of the "on-board" type. This means that the governor moves along with

the car. The assembly is anchored to the frame's upright by four screws. The return part will be anchored to the

upright at the height determined by the installer.

Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer

area in Dynatech's website in order to consult the full manual; http://customers.dynatech-elevation.com/

Cod: DYN 62.07.00