- ページ 5
コントローラー Dynatech T-25のPDF 使用説明書およびメンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Dynatech T-25 8 ページ。 Ucm unit
Dynatech T-25 にも： 使用説明書およびメンテナンス・マニュアル (9 ページ), 使用説明書およびメンテナンス・マニュアル (9 ページ)
ページを印刷するD-Box + Vega A3 Beta + ASG 1XX + T-25 Instruction Manual
Date: 23-05-2017
Revision: 03
D-Box's input signals are typical of the installation controller. As a result, response times of the controller
components are inherent to it even though the total response times of the D-Box + Vega A3 Beta+ ASG 1XX
+ T-25 unit are considered as standard.
In the case of checking the installation or carrying out a manual rescue, it must be checked that the D-Box
is set at the correct operation mode for each of these situations so as to prevent unwanted jamming in the
safety wears.
The parking or anti-creep system, Beta model, incorporated in the Vega governor to detect uncontrolled
movements, must always include a 24V coil in order to operate correctly along with the D-Box.
3 DESCRIPTION OF THE UNIT
3.1 COMPONENTS OF THE SYSTEM
The components making up the system are:
CONTROL SYSTEM
The D-Box operates as a control system.
GOVERNOR
The Vega model two-way governor operates as a UCM actuator.
SAFETY GEAR AND STEERING MECHANISM
The two-way progressive safety gear model ASG-1XX/ASG-1XX UD is used as a braking means.
3.2 OPERATION AS A UNIT
As can be seen in figure 2, the D-Box electronic device is connected to the installation controller and the Vega
governor's parking system. D-Box connection is described in the D-Box's manual for use and maintenance.
The governor is directly anchored to the slab in the machine room or to the upper part of the lift shaft, linked to its
tensioning pulley in the pit via the rope. This tensioning pulley is anchored to the guide rail b means of clamps.
Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer
area in Dynatech's website in order to consult the full manual; http://customers.dynatech-elevation.com/
Cod: DYN 62-1.03
3