- ページ 6

産業機器 Galiso OPTI-LITEのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Galiso OPTI-LITE 18 ページ。 Fiber optic light guide

2.0 SAFETY

Read all instructions before attempting to install or operate this machine. GALISO,

INCORPORATED IS NOT RESPONSIBLE FOR DAMAGE OR INJURY CAUSED BY

UNSAFE USE, MAINTENANCE, APPLICATION, MODIFICATION OR IMPROPER

INSTALLATION OF THIS MACHINE. Please contact Galiso, Inc. at (800) 854-3789 for

guidance when you are in doubt as to the proper safety precautions to be taken when

installing or operating this machine.

Damage to eyesight will occur by looking directly into the Fiber Optic Port or

Light Guide when the power is on. NEVER look directly into the Light Guide or

the Lamp when they are lit.

A. Do not use this unit near water or in an area with excessive water.

B. Do not place flammable materials near the unit. This unit should not be used

near flammable gases!

C. This unit may generate and transmit and/or radiate electromagnetic energy. Do

not place the device next to other sensitive electronic devices. Failure to do so

could result in errant operation of the nearby device.

D. Avoid using or storing the OPTI-LITE in, or on, areas of excessive vibration.

Vibration of the lamp could cause shortening of the life of the Lamp.

E. Do not operate the unit without mounting feet in place. If the mounting feet are

removed, air vents will be blocked.

Notice: Improper ventilation of the OPTI-LITE can cause intermittent operation

and/or failure of the electronics.

F. Do not block ventilation openings on the unit. Do not impede airflow. Always

be certain that the OPTI-LITE has proper clearance of the unit to allow for

ventilation to prevent overheating (see Assembly Sec. 3.0, for accurate

clearance requirements).

Dust accumulation will restrict air flow which can cause damage the unit. (See

maintenance section for cleaning recommendations.)

G. Do not use unapproved Fiber Optic Light Guides (such as any form of plastic

fibers), as they may not be suitable for the high temperatures generated by the

focused beam of high intensity light and could cause a fire.

21-11-1180

!WARNING!

CAUTION:

Section 2 - 1