ページを印刷するSetup Printer
In the "Build" menu, click "Calibrate"
the auto leveling function. This process will take a minute to complete.
When reaching printing temperature,
the printer will beep two times and start to
extrude. Now gently push the filament into
the small hole in the top of the printhead
until extrusion occurs at the nozzle.
When the extrusion completes, remove the
thin line of extruded filament and discard.
500g
, then "Auto Level" to initiate
Next, go to the Maintenance
Section, and click
"Extrude".
5