- ページ 4
サンダー autoright C800895のPDF マニュアルをオンラインで閲覧またはダウンロードできます。autoright C800895 16 ページ。 Electric, 7 and 10 inch random orbital all-purpose buffer
ページを印刷するSERVICE
1. Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel may result in a risk of injury.
2. Accessories must be rated for at least the
speed recommended on the tool warning
label. Wheels and other accessories
running over rated speed can fly apart and
cause injury.
Important!: Do not operate the polisher until
you have inspected each part. If any part is
missing or damaged, do not use it. Return
the polisher to the place of purchase. See
WARRANTY.
READ AND FOLLOW ALL SAFEGUARDS
Like other power tools, buffers are safe
when properly used but can be dangerous
if misused. It is the responsibility of the user
to read and understand all instructions,
IMPORTANT SAFEGUARDS, and safety
precautions before operating the unit and to
use the unit properly. Failure to do so may
result in product damage, personal injury or
loss of life.
Do not try to repair (or disassemble) the
unit yourself. Repairs should be performed
by a qualified shop familiar with this unit
or returned to AutoRight (See warranty).
This unit is to be used with authorized parts
only. When using parts that do not comply
with the manufacturer's specifications and
safety devices, the user assumes all risks
and liabilities.
PROP 65 WARNING
Handling the coated electrical wires of this
product exposes you to lead, a chemical
known to the State of California to cause birth
defects or other reproductive harm. Wash
hands after use.
• Never leave buffer unattended.
• Never leave buffer plugged in while
cleaning.
4
ENGLISH
IMPORTANT SAFEGUARDS
SERVICING A DOUBLE-INSULATED PRODUCT
In a double-insulated product, two systems of
insulation are provided instead of grounding.
No grounding means is provided on a double-
insulated product, nor should a means of
grounding be added to the product. Servicing
of a double-insulated product requires extreme
care and knowledge of the system and should
only be done by qualified service personnel.
Replacement parts for a double-insulated
product must be identical to those parts in
the product.
EXTENSION CORDS
Make sure your extension cord is UL/ETL/CSA
listed and is in good condition. When using
an extension cord, be sure to use one heavy
enough for the current - for lengths less than
18 feet, use a No. 18 AWG. or heavier; for
lengths more than 18 feet, use No. 16 AWG. If
in doubt, use a heavier gauge. An undersized
cord will cause a drop in line voltage resulting
in loss of power and overheating.
STORAGE
Make sure unit is clean and dry before
storing. Store in a dry location. To prevent
damage, the electrical cord should not be
crimped during storage.