- ページ 10

時計 Galleon SIGNALCLOCK V2のPDF インストールとユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Galleon SIGNALCLOCK V2 19 ページ。

TIME SERVER ADDRESS

The Time Server Address page allows you to point the clock to a time server for time updates.

Currently this only accepts an IP address.

You should ensure the time server you are pointing the clock to is synchronised. The clock may

reject time from an unsynchronised source.

Once you have entered a time server address, click the Apply Changes button. A restart is not

required for changes on this page to take effect.

Public Time Servers

If you are pointing the clock to a public time server, you should be aware that these servers

usually use rate limiting to prevent Denial of Service (DoS) attacks and misuse. Pointing multiple

clocks to, or having multiple NTP requests to, a public time server can often lead to a ban by the

public time server. In this case, the clock(s) will indicate they have lost connection to the time

server by flashing 'No Sync' every 60 seconds.

To prevent your devices from being banned by the public time server, you can download and

install our TimeSync software on a non-domain controller system. Point TimeSync to the public

time server and point your clock(s) and any other devices to TimeSync. This minimises the chance

of being banned by the public time server. You should contact Galleon Systems for more

information, and you will need to purchase licenses before using TimeSync.

www.galsys.co.uk

galleonsupport.com

SIGNALCLOCK V2 Manual

TEL:

+44 (0) 121 608 4433

FAX:

+44 (0) 121 608 4477