- ページ 4

ストレッチ包装システム GALLERY STRETCHER-240のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。GALLERY STRETCHER-240 17 ページ。

Set machine on universal mount by placing the back rail of the machine into the 2 rear

slots. Tilt the machine as shown and lower the front onto the mount, the 2 front tabs of

the mount should rest on each side of the machines support rails as shown in the picture

below. This keeps the machine from moving left or right. The metal set screw on each

tab should only be tightened enough to make contact with the inside of the slot on the

machine's frame.

Tapped for

¼-20 metal set screw

(provided)

Left bracket

tab outside