ページを印刷する
#
#
#
The RC-102 remote control is a system remote for all current Copland CD-players and
amplifiers.
To load and unload a disc, press "OPEN/CLOSE" key.
# *
# '#(
This key will open/close the disc tray cyclically.
By pressing this key playback will start directly from the first track.
! ( '#(
By pressing this key playback will stop.
'#(
When the CD-player is in Play mode you can pause by pressing this key once.
!
# '#(
To return to playback mode, press once again.
By pressing this key, the CD-player will skip to previous track and
! #0
'#(
playback will start from the beginning of that track.
Each time the next key is pressed, the CD-player will skip forward one track
#2 '#(
and playback will start from the beginning of that track.
When pressed, the CD-Player will skip forward in steps of five seconds
$
- "
'#(
during playback.
When pressed the CD-Player will skip back in steps of five seconds during
$
#
'#(
playback.
To designate a track directly, select the desired track number with the
#
'#(
numeric keys.
The +10 key are not active on this model.
By continuously pressing the "REPEAT" key within a short time interval
# #
'#(
(less than two seconds) the following tree options will cyclically appear on the display:
"Repeat ON"
( If the repeat function is already active "Repeat OFF" will appear.)
"Repeat TRACK"
"Repeat DISC"
To select an option, stop pressing the key any further when the option desired appears on the
display.
If "Repeat TRACK" has been selected, the letters "RT" will appear on the first line of the
display.
If "Repeat DISC" has been selected, The letters "RD" will appear on the first line of the
display.
5