- ページ 11

スピーカー Dynaudio Xeo 30のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dynaudio Xeo 30 18 ページ。

Dynaudio Xeo 10/20/30

Malfunctions

Interruptions, clicking noises, or other audible

interference when playing music is usually not caused

by radio transmission in the Xeo system. Often, other

external causes influence the transmission quality.

Below are a few tips for improving transmission quality:

1. Position all radio transmitters and receivers away from each other. WLAN devices,

radio receivers, and radio systems may influence each other if they are too close

together. Test out various locations for each device.

2. Switch off the automatic search function in WLAN devices. WLAN devices and

other radio systems permanently scan for available frequencies, thus sending

signals that could disrupt other radio systems. This automatic search function can

usually be switched off.

3. Xeo technology radio signals can, of course, transmit through walls. However,

walls may consist of very different materials, such as wood fibreboard, stone, or

even steel. The walls may also contain complex cable installations for electrics,

phones, TVs, and radios, as well as water pipes and air shafts. These can divert

radio signals. This is why you should test different locations for the Xeo Hub,

Extender, and Link and favour the most direct radio path between the Xeo

components.

4. Some electrical devices, such as microwaves, generate strong electromagnetic

fields that could disrupt radio systems. Do not operate such electrical devices near

Xeo components.

You can ask your Dynaudio Xeo distributor for assistance at any time

Or go to dynaudio.com/support to read the FAQ or to contact the Customer Support

Team. Further information can also be found on the Xeo website at dynaudio.com/xeo

Malfunctions