- ページ 6

スピーカー DYNAVOICE CA802BTのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DYNAVOICE CA802BT 17 ページ。

Unpacking

When you unpack your new Dynavoice speaker, please do it with care. In case the product involves

heavy lifting or if it is too big for one person to handle – make sure to have assistance, we do not

want you to break the product or yourself.

When life happens and you move to a new home, you will want to take your Dynavoice products

with you. The easiest way to do this is in the original packaging so if possible - keep the box and the

packing material.

The box contains:

Manual

Before you start

This amplifier is designed to be matched with a pair of Dynavoice floor standing speakers or book-

shelf speakers (please consult your local Dynavoice dealer for information regarding matching

speaker models with your amplifier). It is important that you do not block any ventilation or place

the amplifier inside any small, non-vented spaces. All other instructions regarding hazardous

placement can be found in the Important Safety Information.

Your amplifier has been tested at our factory before being sealed up inside the packaging, even so

we recommend you to go easy in the beginning. Make sure that everything was included in the box

and that you have made the right connections before turning on the amplifier.

The remote control requires 2x AAA batteries, make sure that there are no obstructions between

the amplifier and the remote signal.

The included Bluetooth antenna needs to be fixed in place, more about this can be found further

on in this manual.

Always make sure that your amplifier is turned off when you connect your speakers. Dis-

regarding this advice may cause a sudden audio spike that can permanently damage your

speakers.

To get the best experience possible from your new Dynavoice amplifier we recommend you to use

high quality cables throughout your entire system.

AC 24V adaptor

Bluetooth antenna

Remote control