- ページ 10

エンクロージャー HighPoint RocketMate 220のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。HighPoint RocketMate 220 13 ページ。 2.5" dual-m.2 driverless & bootable nvme raid enclosure

ページを印刷する

RAID Setting

code

RAID Level

4/9

RAID0

Set the dial to "4/9" – this will create a RAID 0 array after the RM220

is powered on. The LED will glow green.

1/6

RAID1

Set the dial to "1/6" – this will create a RAID 1 array after the RM220

is powered on. The LED will glow blue.

2/7

JBOD x2

Set the dial to "2/7" – this will create two JBOD array after the RM220

is powered on. The LED will glow pink.

3/8

Delete RAID

When the disk is powered on, set the dial code to "3/8", insert the

RAID pin into the "DEL" hole, and press it; the enclosure will flash the

LED twice and delete the array.

Note:

The RAID Switch can only be used with SSDs that have not been

configured into an array.