- ページ 4

アクセサリー Emerson FB1100のPDF フィールド交換マニュアルをオンラインで閲覧またはダウンロードできます。Emerson FB1100 8 ページ。 Flow computer coin cell battery field
Emerson FB1100 にも：ターミネーション・ボード現場交換マニュアル (18 ページ), 交換マニュアル (18 ページ), フィールド交換マニュアル (14 ページ), フィールド交換マニュアル (20 ページ), フィールド交換マニュアル (8 ページ), 交換マニュアル (8 ページ)

FB1100/FB1200 Flow Computer HMI Module Field Replacement Guide

D301816X012

November 2020

WARNING

EXPLOSION HAZARD – Do not disconnect equipment unless power has been removed or the

area is known to be non-hazardous.

DANGER

EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-hazardous.

Performing this operation in a hazardous area could result in an explosion.

DANGER

EXPLOSION HAZARD: Never remove end cap(s) in a hazardous location. Removing cover(s) in a

hazardous location could result in an explosion.

Important

If this equipment is used in a manner not specified by the manufacturer, the protection provided by

equipment may be impaired.

Important

The HMI module includes the Wi-Fi transceiver; once you remove the HMI module; Wi-Fi

communication with the flow computer ceases.

Removing/Replacing the HMI Module

UL Listed HMI Module Field Installed Accessory Kit for Use in Class I, Division 1, Groups C&D and

Class I, Division 2, Groups A, B, C, and D



WARNING

EXPLOSION HAZARD –Never remove end cap(s) in a hazardous location. Removing cover(s) in a

hazardous location could result in an explosion.

Flow Computer HMI Module Display Assembly with LCD and Wi-Fi Field Installed Accessory

Kit Part No. 399379-01-0 for use with UL Listed Model Series FB1100 and FB1200.

Flow Computer HMI Module Display Assembly with LCD and without Wi-Fi Field Installed

Accessory Kit Part No. 621627011-KIT for use with UL Listed Model Series FB1100 and

FB1200.

Flow Computer HMI Module Display Assembly without LCD and with Wi-Fi Field Installed

Accessory Kit Part No. 399380-01-0 for use with UL Listed Model Series FB1100 and FB1200.

Flow Computer HMI Module Display Assembly without LCD and Wi-Fi Field Installed

Accessory Kit Part No. 621627020-KIT for use with UL Listed Model Series FB1100 and

FB1200.

Remove the retaining clamp on the front end cap (if present) using a 3 mm hexagonal

wrench.