ページを印刷する
PROGRAMMING (Dial Plan menu)
Dial Plan
The DDC_VoIP phone can be supplied with a handset and/or a front panel keypad. With this
configuration the user may dial any combination of digits, therefore you may wish to screen the
phone numbers that can be dialled. This section describes the techniques to accomplish this.
Click on the Dial Plan radio button, input the Password and click 'Enter'.
Each index dial plan shows a possible group of digits that are allowed, in all there are 20
groups.
To enable dial plan control, select Yes for Use Dial Plan, in the Calling function section of the
Settings Menu, please refer to page 10 for more details.
When making a call, numbers that are accepted must match one of the groups above.
Digits 0 to 9 that are shown in each group will be tested, whereas the 'x' within the group
indicates that any digit is accepted.
Digits within the square brackets [ ], indicate a range that are allowed at that location within the
group. For instance, 03[02-6], means that the first two digits must be 03, the next digit can be 0 or
any digits 2 to 6, therefore 1,7,8,9 are not allowed.
Another example, 037[189] indicates that only digits 1,8 and 9 are allowed after the 037
combination is entered.
When the number dialled match one of the groups in the dial plan, the unit will make a call as
soon a match has occurred.
The Dialling Timeout option (see page 10) set a period to automatically dial the number, if a '#'
is not entered to end the sequences of digits OR a match did not occur in the dial plan.
Dallas Delta Corporation Pty.Ltd.
Page 14