- ページ 4
スイッチ HighSecLabs DK22 N SeriesのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。HighSecLabs DK22 N Series 15 ページ。 Dvi-i / hdmi / dp video kvm switch
HighSecLabs DK22 N Series にも： クイック・セットアップ・マニュアル (15 ページ)
ページを印刷する
SEC TIONS
Table of Contents
InSTallaTIon
Installing the KVM
General
• Verify that all peripherals and computers are turned off prior to
connecting them to the product.
• The KVM's back panel is divided into Console Ports and Computer
Ports sections.
– Connect peripherals which are due to be shared by the KVM
to the Console ports.
– Connect each computer that requires access to the shared
peripherals to a Computer port group.
– Make sure that every computer is connected to a separate
Computer port group.
– Computer port group numbers are represented by push
buttons on the product's front panel.
– Switch peripherals between computers by pressing the push
buttons on the product's front panel.
Step 1 – Connect peripherals to the KVM Console ports:
• Keyboard: Connect a uSb keyboard to the corresponding KVM
console keyboard port.
• Video: Connect the monitor cable to the KVM console video port.
• Mouse: Connect a uSb mouse to the corresponding KVM console
mouse port.
HSL KVM Quick Setup Guide
1
2
• Audio out peripherals: Connect headphones / speakers to the
KVM console audio-out ports (colored green).
• Audio in peripherals: Connect a microphone to the KVM
console audio-in ports (colored pink).
• USB peripherals: Connect uSb peripherals to the KVM console
uSb port.
3
3.0
3