- ページ 4

スイッチ HighSecLabs DK22H-NのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。HighSecLabs DK22H-N 15 ページ。 2/4/8 ports dual-head kvm switches
HighSecLabs DK22H-N にも：クイック・セットアップ・マニュアル (15 ページ), クイック・インストール・マニュアル (2 ページ)

SECTIONS

Table of Contents

InSTallaTIon

Installing the KVM

General

• Verify that all peripherals and computers are turned off prior to

connecting them to the product.

• The KVM's back panel is divided into Console Ports and Computer

Ports sections.

– Connect peripherals which are due to be shared by the KVM

to the Console ports.

– Connect each computer that requires access to the shared

peripherals to a Computer port group.

– Make sure that every computer is connected to a separate

Computer port group.

– Computer port group numbers are represented by push

buttons on the product's front panel.

– Switch peripherals between computers by pressing the push

buttons on the product's front panel.

Step 1 – Connect peripherals to the KVM Console ports:

• Keyboard: Connect a uSb keyboard to the corresponding KVM

console keyboard port.

• Video: Connect the monitor cable to the KVM console video port.

• Mouse: Connect a uSb mouse to the corresponding KVM console

mouse port.

HSL KVM Quick Setup Guide

• Audio out peripherals: Connect headphones / speakers to the

KVM console audio-out ports (colored green).

• Audio in peripherals: Connect a microphone to the KVM

console audio-in ports (colored pink).

• USB peripherals: Connect uSb peripherals to the KVM console

uSb port.

3.0