- ページ 11

アンプ Gallien-Krueger 1001RB/210のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gallien-Krueger 1001RB/210 17 ページ。 Artist series
Gallien-Krueger 1001RB/210 にも：オーナーズマニュアル (16 ページ)

ページを印刷する

The power cord is detachable and plugs in here.

540W power amp output for Full-Range operation only.

They deliver 540 watts into 4 Ohms. Lower impedances

should not be used. Each jack has a minimum of 8 Ohms

each. Higher impedances such as 8 Ohms, 16 Ohms, or

No Load are acceptable. No damage will result from

operating the amplifier with the speakers disconnected.

Enables BI-AMP operation by connecting a GK-RBH

Series cabinet with the provided 4 conductor Speakon

cable. This connects the 50W amplifier allowing the

Tweeter control on the front panel to control the signal

going to the horn. See Bi-Amp and Normal Operation

on page 7 for more information.

Do not connect a Speakon cable labeled "Bridge

Mode" to the 1001RB. This may result in damage to the

amplifier.

One 4 Ohm or two 8 Ohm cabinets on the 540W Amp.

One or two 8 Ohm horns on the 50W Amp.