- ページ 7
食器洗い機 Frigidaire 4050 SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Frigidaire 4050 Series 18 ページ。 Electrolux
Frigidaire 4050 Series にも： 取扱説明書 (18 ページ), 取扱説明書 (8 ページ)
ページを印刷する
Operating Instructions
(continued)
Sahara
Dry
(available on select models)
When the SAHARA
DRY option is selected,
the
dishwasher
increases
the temperature
of the final
rinse and extends
drying time by approximately
twenty minutes.
The SAHARA
DRY option can be
used with all cycles except
CHINA CRYSTAL,
ECO WASH
AND RINSE ONLY.
For best drying
performance,
select
Hi-Temp
Wash and/or
sanitize.
This will increase
the temperture
during
the wash cycle to improve
drying.
The energy
required to use the SAHARA
DRY
option
costs pennies
per cycle.
You may choose
not to select the SAHARA
DRY option; however
you may have items in your dish load that will not
be completely
dry at the end of the cycle.
Child Lock Controls
To prevent
children
from accidently
changing
the
dishwasher
cycle or starting
the dishwasher,
lock
the dishwasher
controls
by pressing
and releasing
the DELAY START
pad (some models)
or the AIR
DRY pad (some models)
for 3 seconds.
An
indicator
light on the lock graphic
pad will illuminate
when the controls
are locked and no new
selections
can be made until the lock is released.
To unlock the controls,
press the DELAY START
pad orAIR
DRY pad until the indicator
light goes
out.
Delay Start
The DELAY START
option allows you to
automatically
delay starting
your dishwasher
from
1-24 hours.
On models with 1-24 hour delay, press the DELAY
START
pad until the desired
delay time shows in
the STATUS
window.
A light will come on
indicating
the delay start hours and will remain on
until cycle starts.
To cancel the DELAY
START
option and begin the
cycle before the delay period is over, press the
START/CANCEL
pad.
To Cancel a Cycle
You can cancel a cycle anytime during the cycle.
Press START/CANCEL
pad and the dishwasher
will start a 90 second
drain. At the end of the drain,
select the desired
cycle.
When an option
is selected,
the
light above the
pad will come on and remain on until end of cycle.
To turn off the option,
press the pad a second
time. The light above the pad will turn off.