- ページ 10

アンプ Gallien-Krueger Backline 600のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gallien-Krueger Backline 600 16 ページ。 Backline series

ページを印刷する

Installation and Maintenance

Installation:

To insure proper operation and to avoid

potential safety hazards, place the unit on a

firm, level surface. When installing the unit

in a rack, be sure the mounting hardware can

support the amplifier's weight. To save space in

your rack, the Backline's feet can be removed

using a Philips head screwdriver.

Make certain that proper space is provided

for ventilation(at least one inch above). If the

amplifier will be installed in a rack or

other enclosed area, make sure that there is

sufficient air movement within the enclosure to

allow proper cooling. Consult your dealer for

more information.

For combos, make sure there is three feet of

clearance around the sides, top, back and front,

of the unit for maximum ventalation.

Avoid installation in extremely hot or cold

locations, and areas that are exposed to direct

. .

sunlight, or near heating equipment.

Avoid moist or humid locations.

Remember, power amplifiers generate heat.

The heat sink fins and ventilation slots that

form part of the enclosure are specially

designed to remove this heat. Placing other

electronic equipment near these heat-

dissipation systems may possibly affect the

long-term reliability of both your amplifier and

the other equipment.

Positioning:

The Backline combo series should always be used as a

floor standing unit. These combos are not intended for

stacking or table-top placement.

Moving the Unit:

Before moving the unit, be certain to disconnect any

interconnection cords with other components, and make

sure that you disconnect the unit from the AC outlet.

Backline Series

Cleaning:

When the unit gets dirty, clean only with a dry cloth.

Never use benzene, thinner, alcohol, or other volatile

cleaning agents. Do not use abrasive cleaners, as they

may damage the finish of metal parts. Avoid spraying

insecticides near the unit.

Maintenance:

Your new amplifier is rugged. It was built to give you

years of trouble-free operation, if it is operated in accor-

dance with the instructions contained in this manual.

The only maintenance required is cleaning. If you are

going to move your amplifier around frequently, we

recommend a road case to protect it from scratches and

road wear.