- ページ 10
食器洗い機 Frigidaire DishwasherのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Frigidaire Dishwasher 12 ページ。 Dishwasher
Frigidaire Dishwasher にも: サービスデータシート (2 ページ), 取扱説明書 (20 ページ), 配線図 (1 ページ), 取扱説明書 (20 ページ), 配線図 (4 ページ), インストレーション・インストラクション (2 ページ), 取扱説明書 (12 ページ), 取扱説明書 (20 ページ)
CARE AND CLEANING
WARNING
Allow heating element to cool
before cleaning the interior.
Failure to do so can result in
burns.
Outside—Occasionally wipe with a mild nonabrasive
detergent and water. Rinse and dry.
Models with Easy Care Real Stainless Finish —Clean
outer door with warm soapy water and a dishcloth or
sponge. Rinse with clean water and a dry cloth. Do not use
harsh cleaners.
Inside—The inside of the dishwasher is self-cleaning with
normal use. If needed, clean around the tub gasket area
with a damp cloth.
The filter is self-
cleaning. A glass
trap located in the
center of the filter is
designed to collect
pieces of broken
glass, straws, bones
and pits. To remove
items in glass trap,
grasp handle, lift
out, empty and
.
replace
Note: Hard water may cause lime deposit buildup on the
interior of the dishwasher.
Overfill Protector
overfilling and is located in the left front corner of
the tub.
• Clean occasionally with
household cleaner
containing vinegar or
bleach to dissolve any
buildup.
• Overfill Protector should
move up and down freely
about one inch. If it does
not move, lift and clean
underneath.
10
Burn Hazard
—
keeps dishwasher from
Care of Drain Air Gap
If a drain air gap was installed for your built-in dishwasher,
check to make sure it is clean so the dishwasher will drain
properly. A drain air gap is usually mounted on countertop
and can be inspected by removing the cover. This is not
part of your dishwasher and is not covered by warranty.
CAUTION
Property Damage Hazard
Freezing temperatures may cause water lines to rupture.
Be sure all supply lines to and circulating lines within
dishwasher are protected. Failure to do so could result in
property damage.
Winterizing
A dishwasher left in an unheated place should be
protected from freezing. Have a qualified person do the
following:
To Disconnect Service:
1. Turn off electrical power to the dishwasher at the
supply source by removing fuses or tripping circuit
breaker.
2. Shut off water supply.
3. Place a pan under the inlet valve. Disconnect water line
from inlet valve and drain into pan.
4. Disconnect drain line from pump and drain water into
pan.
To Restore Service:
1. Reconnect the water, drain, and electrical power
supply.
2. Turn on water and electrical power supply.
3. Fill both detergent cups and run dishwasher through a
HEAVY WASH cycle.
4. Check connections to make sure they do not leak.
NOTE
See Installation Instructions for more details on disconnecting
and restoring service to your dishwasher.