- ページ 12
アンプ Galls Street Thunder ST280のPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。Galls Street Thunder ST280 18 ページ。 Siren amplifier & light controller
Galls Street Thunder ST280 にも： 据付・取扱説明書 (20 ページ)
ページを印刷する
GENERAL
This unit is designed for easy operation under the stress associated with high-speed
pursuit. Most siren functions are accessible with one simple motion without
repetitive activation of switches or automatic timed switching that can interfere
with desired operation.
LIGHT SLIDE SWITCH
The slide switch is designed for quick pursuit mode operation. The far left position
(OFF) will not activate any outputs. Position 1 will activate the first set of lights
(connected to L1). Position 2 activates both the first and second set of lights
(connected to L1 and L2). Position 3 activates all three sets of lights (connected to
L1, L2 and L3), along with the siren. Each output is protected with a 20A fuse.
Pursuit Mode - Position 3 (farthest right) is generally used for the full pursuit
LIGHT PUSH BUTTON SWITCHES
Four push button switches are
provided to enable four separate
functions. The far left push button
(possibly L. Alley) will control the
item(s) connected to S1. The
second push button (possibly R.
Alley) will control the item(s) connected to S2. The third push button (possibly
Takedown) will control the item(s) connected to S3. The fourth push button will
control the item(s) connected to S4 (possibly gun lock). Each of these four outputs is
protected with a 20A fuse.
OPERATION
mode. It allows for a quick procedure that will activate both the
lights and the siren in one motion. When the slide switch is
moved to Position 3, all three sets of lights will turn on and the
siren will activate into the Wail mode.
The siren may be disabled in the pursuit mode during installation
if desired. (Refer to the section on page 4 under INSTALLER
SELECTABLE OPTIONS).
-11-