- ページ 14

室内装飾品 Cor KRALING LUBKE DeltaのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Cor KRALING LUBKE Delta 19 ページ。

E x tending table assembly

Before you set up the table, you must mount

the 2 rubber glides and the two pull-out castors

supplied.

To do this, remove the two transport strips un-

der the feet and first screw the 2 rubber glides

into the recesses provided under the feet using

the screws supplied.

Then, at the pull-out end, insert the two hou-

sings of the pull-out rollers into the cut-outs

provided.

NOTE: Pay attention to the running direction

and align the housings lengthwise!

Now screw the housings in place with the

screws supplied.

Finally, press the castors into the housing and

check that the castors turn.

Now place the table in the desired position.

Glides and pull-out castors

1 5