- ページ 5

アダプター Dynex DX-CRDRDのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dynex DX-CRDRD 20 ページ。 Lecteur de cartes interne tout-en-un
Dynex DX-CRDRD にも: マニュアル (6 ページ), クイック・セットアップ・マニュアル (2 ページ), (ユーザーガイド (20 ページ), (クイック・インストール・ガイド (2 ページ), (フランス語) 取扱説明書 (20 ページ), (フランス語) ラピッド・インストール・マニュアル (2 ページ)

Dynex DX-CRDRD ユーザーマニュアル
Internal All-in-One Card Reader/Writer
3 If you want the alternate colored bezel, change it now by pressing the plastic clips on
each side of the card reader with a pen or pencil and pulling the bezel off, then
snapping the new bezel into place.
4 Locate a USB connector on the motherboard and make sure the connector is
compatible with your card reader' s USB connector.
Pin
P5
P4
P3
P2
P1
5 Carefully slide your card reader into the empty
3.5" drive bay.
6 Secure your card reader to the drive bay with the four mounting screws (two screws
per side).
Screw
Wire color Function
No contact
No contact
Black/shield Ground
Green
D+
White
D-
Red
Vbus
Push in
plastic clips
Screw
5