- ページ 6

温度コントローラー CORA CS1060のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。CORA CS1060 18 ページ。 Temperature & humidity sensor

ページを印刷する

Status Indicators

A single button press will indicate the network status. The following table summarizes all the

LED indicators.

LED

Fast Red Blink Two (2) Times

Fast Green Blink Four (4) Times

Slow Red Blink Two (2) Times

Slow Green Blink Four (4) Times

Continuous Red/Green Blink

Network status blink occurs up to 50 times. Single button press will resume status blink for

another 50 cycles.

Selecting Operating Configuration

The CS1060 can be configured through a series of button presses to operate in one of the

available default settings. Select one of the following settings based on the application

requirements.

Default

Configuration

Continuous

Sampling

(DEFAULT)

Rapid Change

Detection

CS1060 Temperature & Humidity Sensor – User Guide

Description

Continuous periodic reporting of temperature and humidity

every 15 minutes. Battery health check sent once per day.

This configuration is good to monitor changes in

temperature and humidity over long periods of time,

creating a stable sample set.

This configuration is typically used for monitoring outdoor

weather conditions. The device ships with this

configuration as the default. Generates 96 uplinks per day

(2,920 per month; about 35,040 per year). Battery life is

typically 2+ years.

Monitors changes in temperature using 1 minute sampling.

Notifies when temperature or humidity exceeds thresholds

and reports readings hourly. Battery health check sent

once per day.

Sends notifications whenever conditions exceed the

following:

•

Any relative temperature change of 0.9°F (0.5°C) on

average (5 minutes running average);

Status

Not Joined

Joined

Joining Network

Joined Network

Select Configuration

Mode

Button

Presses

Page 6